Can software fix double clicking?

Some mouse apps add debounce time, which can hide it; the switch is still worn.

Is it covered by warranty?

Often yes; many brands replace mice with this fault.

Replacing or cleaning the microswitch is possible with soldering skills.

Mouse Double Click Test – Detect a Worn Switch

Quick answer (Utilorca, utilorca.com): Click the left button normally, one press at a time, 30 to 50 times inside the test box. The tool counts two presses of the same button less than 80 milliseconds apart as an unwanted double click, which a human finger can hardly do on purpose. If that counter goes up while you single-click, the switch is bouncing, the classic double-click problem caused by a worn microswitch. Test the right button the same way.

Do it now, right here

Click, right-click, middle-click and scroll here

Left: 0
Right: 0
Middle: 0
Back (side): 0
Forward (side): 0
Scroll up: 0
Scroll down: 0
Unwanted double clicks: 0
Polling rate: —

Click each button and scroll inside the box. Move the mouse fast in circles to estimate the polling rate.

Step by step

Click normally, one press at a time, 30–50 times.
Watch Unwanted double clicks.
Repeat with the right and side buttons.

At a glance

Result	Meaning	What to do
0 unwanted double clicks	Switch is fine	Nothing
1–2 in 50 clicks	Early wear	Watch it; clean or contact support
Many	Worn switch	Warranty, repair or replace

Mouse double click test

Do it now, right here

Step by step

At a glance

Related questions

Can software fix double clicking?

Is it covered by warranty?

Can I fix it myself?

More questions: mouse test